Please read description carefully.
Do not base your order on the picture presented.
Due to MAP restrictions, we are unable to list our price for this product online. Please call us for pricing!
The new Philips HeartStart FR3 is Philips best professional-grade AED yet and is now making lifesaving faster, easier, better for professional responders.
As the smallest and lightest professional-grade AED available among leading global manufacturers*, the HeartStart FR3 continues Philips legacy of providing AEDs that are designed to be rugged, reliable, and to support you every step of the way.
Philips, the worldwide leader in automated external defibrillators (AEDs), helped chart the course for the widespread use of AEDs to treat sudden cardiac arrest (SCA) among professional responders starting with the innovative ForeRunner and HeartStart FR2 AEDs. The Philips HeartStart FR3, Philips is raising the bar for AEDs.
Faster- helping you start delivery of the right therapy faster by significantly reducing deployment time.
Easier- helping make your job easier with the smallest and lightest professional-grade AED among leading global manufacturers. It is designed to be rugged, reliable and ready to use.
Better- helping support a culture of continuous improvement with data management solutions.
Supplied with AED, primary battery (1), SMART Pads III (1 set), printed instructions (Setup Guide) and CD-ROM (Administrative Reference)
Waveform: SMART biphasic Truncated Exponential waveform parameters adjust as a function of patient impedance. Adult nominal peak current 32A (150J into a 50 ohm load); pediatric nominal peak current 19A (50J into a 50 ohm load) using optional Infant/Child Key
Shock delivery: Via defibrillator pads placed in the anterior-anterior (Lead II) position for adults; anterior-posterior position for infants and children under 55 lbs (25 kg) or 8 years old
Controls: On/Off button, shock button, option buttons. Auto-On feature, when used with the optional FR3 carry case, enables FR3 to power up when case lid is opened
Indicators: High-resolution color LCD, bepper, voice prompts, tones and chirps, audio speaker, connector socket, ready light, shock button
Advanced Mode: Configurable using optional heartStart Configure software
ECG Display Screen: LCD color display, 320 x 240 pixels. 2.8" x 2.1" (7.2 cm x 5.4 cm)
Bandwidth: 1 Hz to 30 Hz (-3dB), nominal (non-diagnostic)
Monitored Lead: Lead II using anterior-anterior adult pads placement
Physical: Size- 2.7 high x 5.3 wide x 8.7 deep (6.9 cm x 13.5 cm x 22.1 cm). Weight: 3 lbs 8 oz (1.6 kg) with FR3 standard battery installed
Environmental/physical requirements: Sealing- Meets IEC529 class IP55 with battery installed. Temperature-Operating/standby: 32°–122°F (0°– 50°C). Altitude- 0 –15,000 feet (0 –4,572 meters). Shock/drop- Meets MIL-STD-810F 516.4, Procedure IV. Abuse tolerance- (After a ibe-meter drop to any edge, corner, or surface in standby mode). Vibration- Meets MIL-STD-810F 514.5 C-
Bluetooth 2.0 Class II Wireless Transceiver Module: Function- Transmit retrospective event data or configuration setting wirelessly
Patient analysis system: ECG analysis- Evaluates impedance of defibrillator pads for proper contact with patient skin, evaluates the ECG rhythm and signal quality to determine if a shock is appropriate; also detects artifact and pacemaker. SMART CPR- Evaluates key characteristics of the presenting VF and determines the initial therapy: shock first, or CPR first quickly followed by a shock. Sensitivity/specificity- Meets AAMI DF80 requirements and AHA recommendations for adult defibrillation. Quick Shock- Typically arms in <8 seconds from the end of the "Stop CPR" prompt
FR3 primary battery: Type- 12 VDC, 4.7 Ah, lithium manganese dioxide long-life primary cells. Capacity - Typically 300 shocks or 12 hours of operating time at 77° F (25° C) when configured for monitoring after No Shock Advised (NSA). 7.5 hours of operating time at 77° F (25° C) when configured for CPR after NSA. Standby life- 3 years minimum when stored under standby environmental conditions (battery installed). Shelf life- 5 years
SMART Pads III: Applications- Disposable, multifunction defibrillation pads for adult or infant/child patients. Time-saving peel and place pads can be removed from packaging and stored in the FR3 carry case. Pads can be preconnected to FR3, which enables testing during FR3's routine self-test.
Infant/Child Key (optional): Function- Selects therapy for infants or children under 55 lbs (25 kg) or 8 years ol
FR3 data card: Function- Stores a minimum of 8 hours of ECG, event, and if configured, voice recording. Can also be used for configuring FR3.
Automated and user-activated self-tests: Automatic self-tests Test internal circuitry, waveform delivery system, ECG acquisition, temperature, status (or readiness) of attached accessories (SMART Pads III and FR3 data card) and battery. Automated self-test frequency Daily, weekly, monthly, power on, and runtime during all modes of operation.User initiaited tests Automatic self-tests plus tone, display, and button performance.
FR3 training battery and training pads (optional): Function- Places FR3 into a scenatio-based training mode and simulates shock therapy. Type- 10.8 Volt, 4.5 Ah Li-ion battery.
Eligible for FREE or discounted ground shipping.
Medex SKU: PHP-861389