Please read description carefully.
Do not base your order on the picture presented.
Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies, and more. Electrical receptacle inside (5A at 120VAC) to plug in a stirrer, shaker, or other apparatus.
Small (2.5 cu. ft.) and medium (3.75 cu. ft.) incubators each come with one plated-steel shelf; large (5.0 cu. ft.) incubator comes with two shelves.
Easy to operate:
Controls are conveniently located at the top of the incubator chamber.
Keypad with arrow keys to increase or decrease setpoint temperature in 0.1°C increments.
Over-temperature value is automatically set at 3°C above set-point.
PID controller comes with fixed parameters so no tuning is required.
Circuit breaker protects incubator from power surges; battery backup.
Designed to stack two units.
Big three-character LED display:
Digits display actual temperature to nearest 0.1°C.
Display shows current value for setpoint temperature.
HEAT indicator light cycles on and off to show when incubator heaters are on.
ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software.
Small, medium, and large workload capacities:
Available in three chamber capacities.
Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement.
Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds 11 shelves.
Low-maintenance incubators with inner and outer doors:
Cabinet has durable, enamel-coated steel exterior.
Extruded aluminum trim has acrylic powder coating.
Chamber is easy-to-clean stainless steel.
Low-watt-density heater elements are designed for long life.
Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss.
Outer door opens to 180° for unhindered access and features two grabber-type latches.
Inner door is tempered glass.
Steel shelves are 173/8 in. wide and 163/4 in. front-to-back (44 x 42.5cm).
Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation.
Certifications: CSA approved.
Capacity (Chamber Volume): 3.75 cu. ft. (106.2L).
Temperature Range: 30° to 75°C (86° to 167°F).
Average Uniformity: ±0.7°C at 37°C.
Control Sensitivity: ±0.1°C.
Recovery: 2 min.
Air Changes per Hour: 4.
BTU per Hour (75°C): 360.
Exterior L x W x H: 23.5 x 26 x 33 in. (60 x 66 x 84cm).
Interior D x W x H: 18 x 18 x 20 in. (46 x 46 x 51cm).
Electrical Requirements: 120V 60Hz, 260w, 2.2A.
Medex SKU: FSC-11-690-625D
Warranty: 1 year